Polybenzimidazole
Polybenzimidazole is a kind of rubber that are mainly used in assembling recipes, such as different input and output busses/hatches. It is also used in making Plastic Circuit Boards.
How to make Polybenzimidazole
Polybenzimidazole is mainly made from Diaminobenzidine and Diphenyl Isophthalate.
Chemically React Diaminobenzidine and Diphenyl Isophthalate to obtain Polybenzimidazole.
Polybenzimidazole = Diaminobenzidine + Diphenyl Isophthalate (

How to make Diaminobenzidine
Step 1: Mix Nitric Acid (
Nitration Mixture = Nitric Acid + Sulfuric Acid (Mixer)

Step 2: Chemically react Chlorobenzene with Circuit 1 and Nitration Mixture to make Nitrochlorobenzene. (
Chlorobenzine : Chlorine Gas + Benzene (LCR Cir 1)

Nitrochlorobenzene : Chlorobenzine + Nitration Mixture (

Step 3 : Chemically react Nitrochlorobenzene, Hydrogen and a tiny pile of copper dust to obtain Dichlorobenzidine.
Dichlorobenzidine = Nitrochlorobenzene + Hydrogen + Tiny pile of Copper Dust (

Step 4 : Chemically react Dichlorobenzidine, Ammonia and Zinc Dust (Not consumed) to obtain Diaminobenzidine.
Ammonia = Hydrogen + Nitrogen (

Diaminobenzidine = Dichlorobenzidine + Ammonia + Zinc dust (NC) (

How to make Diphenyl Isophthalate
Step 1: Chemically React Potassium Dichromate, Dimethylbenzene and Oxygen to obtain Phthalic Acid.
Chromium Trioxide = Chromium Dust + Oxygen (

Potassium Dichromate = Chromium Trioxide + Saltpeter Dust (

Dimethylbenzene = Methane + Benzene (Cir 1

Phthalic Acid = Potassium Dichromate + Dimethylbenzene + Oxygen (

Step 2: Obtain Phenol
Note that Phenol is a byproduct of making Diaminobenzidine
There are 2 ways of obtaining phenol through the LCR:
1.Benzene + Chlorine + Water = Phenol + Hydrochloric Acid+ Diluted HCl (LCR Cir 24)

2.Benzene + Chlorine + Sodium Hydroxide = Phenol + HCl + Salt (LCR Cir 24)

Step 3: Obtain Diphenyl Isophthalate
Diphenyl Isophthalate = Phthalic Acid + Phenol + Sulfuric Acid (

Uses of Polybenzimidazole
Making Plastic Circuit Boards

Making Input/Output Busses/Hatches

Turning into sheets for machine hulls


